Skip to main content

How to setup 2FA On Linux SSH Login

  This is a simple setup guide to enabling Two Factor Authentication (2FA) on Linux SSH login. I this article I wont go deep into setup and issues that I have faced when implementing this. First thing is first Update your system first. I have used Ubuntu 20.04 and it is always up to date. To enable 2FA you need to install google authenticator modules sudo apt install libpam-google-authenticator Configuration for PAM and SSHD Add the the following line to /etc/pam.d/sshd and After adding this line please restart the sshd services.  auth required pam_google_authenticator.so Go to /etc/ssh/sshd_config and check if the following line exist. Default value will be "no" so change it to "yes" to activate.  ChallengeResponseAuthentication yes Configuration for Authenticator In the terminal run google authenticator command It will ask few things to acknowledge by user. Details you can see from the below video. Once this part is done you are ready to use the 2FA in ubuntu. T

Clover Display M302 hack

Its been a while i have this LCD and today i thought of connecting the LCD display to Arduino. Unfortunately i could not found any pin outs of this from any where and from the manufacture. Actually this is very old model which i got from old FAX machine and this display is a very cheap from online sources.

Clover Display M302 PCB Ver 1.0 (16x2) which has 10 pin flat cable. After researching for a while from the internet i have seen in many forums people are asking for help on how to connect it and what is the pin configurations? so i thought of helping them as well as my self at the same time.

After going through some of my old collections of Russian data of displays and things i found a basic diagram of how 10 pin LCD display configuration. 

PIN1   - VSS
PIN2   - VDD
PIN3   - CONTRAST
PIN4   - RS
PIN5   - R/W
PIN6   - ENABLE
PIN7   - DB4
PIN8   - DB5
PIN9   - DB6
PIN10 - DB7

I tried these configurations and wired up to the arduino with the LCD sketch and it worked on the first try. Adjusting the contrast and it was perfect. I hope this will help to those who looking for a solution.





Comments

Popular posts from this blog

SIMCOM SIM900A fixed

Since everyone is interested in this post and lots of request comes to get the firmware, i have put a link so that everyone can download it easily. SIMCOM 900A firmware Its been a while that i was trying to fix the SIM900A GSM module. This module support local GSM band but after some researches it was concluded that it is carrier locked :(. After long conversion of days to actual chip manufacture SIMCOM, they told it can be fixed by updating its firmware to latest original version but unfortunately they don't provide firmware to small parties. I never stop trying to get the firmware and SIMCOM again replied, this time they said contact local SIMCOM supplier and request for firmware. But this little Maldives don't have SIMCOM or any electronics manufacturer. So i contacted my friend coody from NOA LABS/Smart prototyping (a friend in china) and told him to help me. I explained him what to do so he can communicate with SIMCOM in china. Finally he sends and email saying that

TCP communication from NEOWAY M590E- Successful

Some of the GSM/GPRS chips do not support HTTP services and since the modems are controlled via AT commands, the AT command sets are very limited to HTTP commands in NEOWAY M590E. The only option to communicate with any cloud based or locally hosted server was using TCP protocol. I have used HTTP services in many of my projects and experiments, it is easy and with few lines of code can manage an HTTP requests. For weeks i have been struggling with TCP request and every time it fails to connect or sometimes data is sent but from server side there is no new data fetched. Basically TCP is transport layer in OSI model and HTTP is in application layer. TCP will do a socket based connection to servers predefined port. For example  test.com:8989. what i mean is it needs a listener to listen to port that you define or open to use. After weeks of reading articles and AT command sets thoroughly, finally i managed to handle a TCP request from modem. But still it fails sometimes or unable to